Battery Holder – 4xAA to Barrel Jack Connector

Battery Holder – 4xAA to Barrel Jack Connector

Sold by: Techmart BD

৳  42.00

Product details of Battery Holder – 4xAA to Barrel Jack Connector

  • This is a simple 4 cell AA battery holder.
  • The 5 inch cable is terminated
  • Its  standard 5.5×2.1mm
  •  Center positive barrel jack connector

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5×2.1mm, center positive barrel jack connector

the average voltage regulator has about 1V of dropout (but can vary greatly). This pack, with normal alkaline batteries, will output ~5.5V causing a normal 5V board to run at around 4 to 4.5V. This depends a lot of what board and processor you are using with the battery pack. Please consult yer datasheet.

Available : 8 Sold : 22

8 in stock

Quantity
SKU: ddd Category:

Share:

Product details of Battery Holder – 4xAA to Barrel Jack Connector

  • This is a simple 4 cell AA battery holder.
  • The 5 inch cable is terminated
  • Its  standard 5.5×2.1mm
  •  Center positive barrel jack connector

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5×2.1mm, center positive barrel jack connector

the average voltage regulator has about 1V of dropout (but can vary greatly). This pack, with normal alkaline batteries, will output ~5.5V causing a normal 5V board to run at around 4 to 4.5V. This depends a lot of what board and processor you are using with the battery pack. Please consult yer datasheet.

Vendor Information

X