BME280 Temperature, Humidity & Pressure Sensor

BME280 Temperature, Humidity & Pressure Sensor

৳  1,198.00

ME-BME280 is a Breakout Board featuring a Bosch Sensortec BME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm.

Available : 26 Sold : 4

26 in stock

Quantity
SKU: 0987435687 Category:

Share:

ME-BME280 is a Breakout Board featuring a Bosch Sensortec BME280 Temperature, Humidity & Pressure Sensor. The board has selectable I2C address jumper (solder link GS2), I2C pull-up resistors, 7 pin header 2.54mm, and two mounting holes 3.5mm. Default setting of the board; single power rail Vdd=Vdd_IO (solder link GS1), pull-ups resistors (R2, R3) 4.7k, protocol selector resistor 0ohm (R1), decoupling capacitors 0.1uF on both power supply pins Vdd & Vdd_IO. If you connect board to both power rails VDD_IO 1.8V and VDD 3.3V be sure to remove the power rail jumper GS1! BME280 FEATURES – Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA – Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz) – Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V VDDIO interface voltage range: 1.2 V to 3.6 V – Current consumption 1.8 uA @ 1 Hz humidity and temperature 2.8 uA @ 1 Hz pressure and temperature 3.6 uA @ 1 Hz humidity, pressure and temperature 0.1 uA in sleep mode – Operating range -40…+85 C, 0…100 % rel. humidity, 300…1100 hPa – Humidity sensor and pressure sensor can be independently enabled/disabled ADDITIONAL INFORMATION Weight: 1.25g Dimensions: 24mm x 16mm x 1.6mm.

Vendor Information

X