CP2102 USB UART Board (type A)

CP2102 USB UART Board (type A)

৳  423.00

Supports Windows 8
Voltage output support: 5V or 3.3V
Integrated USB protection device: SP0503
3 LEDs: TXD LED, RXD LED, POWER LED
Pins accessible on pinheaders: TXD, RXD, RTS, CTS
Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided)
Applications:
Upgrade of RS-232 legacy devices to USB
USB to RS-232 serial adapter
User Guideline:
In the case of working with a MCU:

VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V)
GND: connects to GND
TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX) RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX)
RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS) CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS)

Quantity

Share:

The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.

CP2102 features:

Single-Chip USB to UART Data Transfer
No external resistors required, no external crystal required
On-chip power-on reset circuit and voltage regulator
Integrated 1024-Byte EEPROM
USB Function Controller
USB Specification 2.0 compliant; full-speed (12 Mbps)
USB suspend states supported via SUSPEND pins
UART
All handshaking and modem interface signals
Data formats supported:
Data bits: 5, 6, 7, and 8
Stop bits: 1, 1.5, and 2
Parity: odd, even, no parity
Baud rates: 300 bps to 1 Mbits
576 Byte receive buffer; 640 byte transmit buffer
Hardware or X-On/X-Off handshaking supported
Event character support
Virtual COM Port Device Drivers
Windows 8/7/Vista/Server 2003/XP/2000
MAC OS-X/OS-9
Linux 2.40 or higher
USBXpress Direct Driver Support
Windows 7/Vista/Server 2003/XP/2000
Windows CE
Temperature Range
–40 to +85 °C

Vendor Information

X