Voltage Sensor Module

Voltage Sensor Module

৳  79.00

This module is based on resistance points pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V ( if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V ). Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 100% brand new and high quality

Available : 30 Sold : 0

30 in stock

Quantity
SKU: 082978675 Categories: ,

Share:

Product Description This module is based on resistance points pressure principle, and it can make the input voltage of red terminal reduce 5 times of original voltage. The max Arduino analog input voltage is 5 V, so the input voltage of this module should be not more than 5 V x 5 = 25 V ( if for 3.3 V system, the input voltage should be not more than 3.3 V x 5 = 16.5 V ). Because the Arduino AVR chip have 10 bit AD, so this module simulation resolution is 100% brand new and high quality Quantity:1pc Size: 25mm×13mm/0.98″×0.51″(approx) TThis module is based on principle of resistive voltage divider design, can make the red terminal connector input voltage to 5 times smaller.Arduino analog input voltages up to 5 v, the voltage detection module input voltage not greater than 5Vx5=25V (if using 3.3V systems, input voltage not greater than 3.3Vx5=16.5V). Arduino AVR chips have 10-bit AD, so this module simulates a resolution of 0.00489V (5V/1023), so the minimum voltage of input voltage detection module is 0.00489Vx5=0.02445V. Voltage input range : DC0-25 V Voltage detection range : DC0.02445 V-25 V Voltage analog resolution : 0.00489 V Output Interface : “+ ” connected 5/3.3V, “-” connected GND, “s” connected Arduino AD pins DC input interface : red terminal positive with VCC, negative with GND By 3P connector, connect this module with the expansion of board Arduino, not only makes it easier for you to detect voltage battery, can also use the IICLCD1602 LCD to display voltage. Application : Connect this vlotage sensor module with Arduino sensor shield through 3 Pin sensor cable, not only can easily realize to detect and control the voltage, but also can display the voltage through the IIC LCD1602 LCD module and make voltage monitor.

Vendor Information

X