WeMos D1 R1 WiFi Development Board

WeMos D1 R1 WiFi Development Board

৳  599.00

Microcontroller ESP-8266EX
Operating Voltage 3.3V
Digital I/O Pins 11
Analogue Input Pins 1 (Max Input is 3.2V)
Clock Speed 80Mz/160MHz
Flash 4MB
The D1 R1 is a mini wifi board based on ESP-8266EX.

11 digital input/output pins,

all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) A Micro USB connection A power jack, 9-24V power input.

Compatible withArduino Compatible with nodemcu Getting Started Arduino Getting Started NodeMcu Getting Started Technical specs:

Microcontroller ESP-8266EX Operating Voltage 3.3V Digital I/O Pins 11 Analog Input Pins

1 Clock Speed 80MHz/160MHz FLash 4M bytes Length 68.6mm Width 53.4mm Weight 25g

Pin Function ESP-8266 Pin TX TXD TXD RX RXD RXD A0 Analog input, max 3.3V input A0 D0 IO GPIO16 D1 IO,

SCL GPIO5 D2 IO, SDA GPIO4 D3 IO,Pull-up GPIO0 D4 IO,pull-up, BUILTIN_LED GPIO2 D5 IO, SCK GPIO14 D6 IO,

MISO GPIO12 D7 IO, MOSI GPIO13 D8 IO,pull-down,

SS GPIO15 G Gound GND 5V 5V – 3V3 3.3V 3.3V RST Reset RST *All IO have interrupt/pwm/I2C/one-wire supported(except D0) Programming:

The D1 R1 has a micro USB for auto programming. Also you can programming it using OTA Warnings:

All IO is work at 3.3V. Package included:

1 x WeMos D1 R1 WiFi ESP8266 Development Board Compatible Arduino UNO Program By Arduino IDE

Available : 100 Sold : 0

100 in stock

Quantity
SKU: 87788778788777 Category:

Share:

Microcontroller ESP-8266EX
Operating Voltage 3.3V
Digital I/O Pins 11
Analogue Input Pins 1 (Max Input is 3.2V)
Clock Speed 80Mz/160MHz
Flash 4MB
The D1 R1 is a mini wifi board based on ESP-8266EX.

11 digital input/output pins,

all pins have interrupt/pwm/I2C/one-wire supported(except D0) 1 analog input(3.3V max input) A Micro USB connection A power jack, 9-24V power input.

Compatible withArduino Compatible with nodemcu Getting Started Arduino Getting Started NodeMcu Getting Started Technical specs:

Microcontroller ESP-8266EX Operating Voltage 3.3V Digital I/O Pins 11 Analog Input Pins

1 Clock Speed 80MHz/160MHz FLash 4M bytes Length 68.6mm Width 53.4mm Weight 25g

Pin Function ESP-8266 Pin TX TXD TXD RX RXD RXD A0 Analog input, max 3.3V input A0 D0 IO GPIO16 D1 IO,

SCL GPIO5 D2 IO, SDA GPIO4 D3 IO,Pull-up GPIO0 D4 IO,pull-up, BUILTIN_LED GPIO2 D5 IO, SCK GPIO14 D6 IO,

MISO GPIO12 D7 IO, MOSI GPIO13 D8 IO,pull-down,

SS GPIO15 G Gound GND 5V 5V – 3V3 3.3V 3.3V RST Reset RST *All IO have interrupt/pwm/I2C/one-wire supported(except D0) Programming:

The D1 R1 has a micro USB for auto programming. Also you can programming it using OTA Warnings:

All IO is work at 3.3V. Package included:

1 x WeMos D1 R1 WiFi ESP8266 Development Board Compatible Arduino UNO Program By Arduino IDE

Vendor Information

X